Tele Vue’s “is” designation denotes instruments capable of accepting Imaging System photographic accessories. Tele Vue has designed this series of accessories in conjunction with each optical system so you are ensured of compatibility and maximum performance. While the Tele Vue NP101is maintains all the visual prowess of the standard NP101, the larger rear elements and larger focuser along with a host of proprietary Imaging System accessories, make it ideally suited for the CCD imager.
Concept
CCD cameras have challenged telescope optics beyond anything ever placed at the focal plane. I knew our APO objectives were up to the challenge, and with the proper tweaks would be extraordinary tools for the imager. With Tele Vue Imaging System (“is”) telescopes, we have refined our instruments and optional equipment beyond anything a CCD chip has seen.
Development
For 30 years, Tele Vue has pushed the boundaries of APO refractors, as well as eyepieces, to the recognized pinnacle of performance. We were gratified but not surprised that Backyard Astronomer’s Guide said of the NP101: “optics don’t get any better than this.” No wonder Sky and Telescope rated the NP101 tops and selected it as the test instrument for its landmark review of the SBIG STL11000 CCD camera . The “is” versions of the Tele Vue-60, NP101, and NP127 retain the exemplary wide field and planetary visual capability while adding new features to make imaging easier and more flexible.
- Tele Vue-NP101is
- Tele Vue-NP127is
We were determined to make the NP series optically, mechanically, and functionally as perfect as possible for imaging up to 50mm diagonal chips without penalty to its near ideal visual operation. How? By applying the developments created for the Tele Vue-60is to the new NP101is and NP127is and then going beyond.
The NP101 (540mm, f/5.4, 4″) and NP127 (660mm, f/5.2, 5″) maintain their optical specifications yet with redesigned 4-element optical systems. Larger rear lens groups absolutely minimize vignetting in formats up to 50mm diagonal. For these large chips an optional field corrector was developed so the corners of the newly brightened edges would virtually be as perfect as the center of the field.
Next, to take full advantage of the larger lenses, we developed a larger focuser and draw tube having a 3″ front aperture and 2.4″ rear aperture. This eliminates any restriction of the larger diameter converging light cone. We build and test the rack and pinion focuser to hold 12 lbs. of weight, yet still permit extremely fine focusing control via a 10:1 dual speed pinion assembly. This new draw tube also permits quick change from visual to imaging operation and allows full camera rotation without focus change. In addition, it has the capability to correct for any residual focal plane tilt and accepts a “position stop” for our digital micrometer to allow repeatable focus measurement to 0.0001″.
To maintain squareness to the optical axis while changing camera orientation, the draw tube has three lock screws that tighten against a taper on the “imaging insert” ring. This insert is threaded to accept Tele Vue’s new Imaging System accessories including large diameter extension tubes, optical accessories, and camera and CCD attachments, all with mating threads.
The Focusmate 10:1 planetary ball type reduction focuser provides extremely sensitive focus adjustment, measurable with the optional Digital Micrometer Kit to better than 1/10,000″. Also, the optional Focusmate Driver permits electronic motor control of the focusing process. The Focusmate Driver has direction push-buttons and adjustable speed. A tap on the button permits vibration-free focusing in steps as small as approximately 0.0005″.
Tele Vue has been known for producing visual instruments “even better than you imagined.” We aim to achieve the same with our imaging equipment. Our dedicated local machinists and in-house staff are as committed as ever to deliver on these quality and performance goals.
Technical Specifications
NP101is Specifications
Type: APO (Nagler-Petzval) Refractor
(Elements/Groups: 4/2)
Objective (mm): 101
Focal Length (mm): 540
Focal Ratio (f/#): 5.4
Length OTA (inch): 25.5
Length with diagonal (inch): 28.5
Weight OTA/Std. Config (lbs): 10.7 / 10.7
Drawtube/Focuser: 2.4-inch, Focusmate dual-speed rack/pinion
Maximum Visual Field (deg.): 4.9 (with 2-inch 55mm Plössl)
Maximum Recommended Power (x): 250
Tele Vue Eyepiece Performance: View Eyepiece Chart
NP101is Hard Case Specifications
Fits TV-NP101, TV-NP101is, and Genesis (f/5) only.
Significantly shorter (7.5″) than NP101/NP101is hard case it replaces.
Supports telescope by the tube, taking pressure off the front cell and focuser pinion.
Two removable soft carry bags in the case lid hold a variety of accessories including the diagonal, and 9 eyepiece cutouts. There are three more cutouts in the hardcase itself.
Dual handles designed to fit together comfortably in hand.
Positive lock latches with locks.
Digital Indicator and Starbeam friendly.
Opens flat.
Approximate maximum exterior dimensions (handles flat): 30½x11x9¾inches (75x30x25cm)
In the Box
NP101is
Enlarged focuser with 3″ entrance aperture and 2.4″ exit aperture
Focuser body has brass clamp ring with 2-lock knobs
Accessory end-ring with tilt capability and 3-lock knobs
Imaging insert threaded for Imaging System components.
2″ accessory insert for visual or other 2″ accessories
Focusmate dual-speed focuser 10:1
Sliding metal dew shield
Screw-on metal lens cover
Hard-shell carry case