The optical window has high quality AR+AR multi-layer coatings. In addition the sensor surface is AR coated, all of which significantly reduces halos around bright stars. IR blocking is not present, so that the cameras can be used with maximum sensitivity to H-alpha and near IR when desired, or a simple IR blocking filter (L filter) can be attached for typical RGB imaging with IR cut.
ZERO GLOW | Easy Calibration No Extra Noise
With the QHYCCD anti-amp glow technology, the QHY128C exhibits zero amplifier glow, even in long exposures. This makes long exposures of DSOs possible and easier to process. There are only a few CMOS cameras that can achieve zero amplifier glow results. The QHY128C is one.
The QHY128C benefits from more than a decade of cooled camera design experience. QHYCCD has implemented full dew control solutions. The optical window has a built-in dew heater and the CMOS chamber is protected from internal humidity condensation.
QHYCCD offers a variety of mechanical adapters for the QHY128C allowing it to fit a broad range of accessories, including the QHYCCD OAG, 0.5mm-27.5mm flexible back focus adjust spacer, 2-inch T-ring, IR filter holder and more. QHYCCD has a combination table which can be found on specification page.
128MB DDR Buffer
The QHY128C has a 128MB DDRII buffer. This is much greater than one full frame and is ideal for buffering the image in the camera. It helps tremendously with slower computers and also USB2.0 connections. It improves the data transfer stability and flow control.
|Color or Mono
|Full Rez Frame Rate
|Max Frame Rate
||6036 x 4028
||5.97 microns DC
In the Box
- QHYCCD QHY128C color camera
- 50,8mm adapter
- USB 3.0 cable
- 12V power cable with cigarette plug
Manual & Warranty
QHYCCD 2-Years Warranty