Pegasus Astro Mounting Solutions
Have you ever wanted to mount your Pegasus Pocket Powerbox, Powerbox Micro, Powerbox Advance, Ultimate Powerbox or USB Hub to a Losmandy or Vixen rail, Synta dovetail shoe etc? Now you can with these diverse mounting solutions.
The system consists of two parts: a bracket for your Pegasus component and one of several different attachments.
See Technical Specification for Compatibility
ATTENTION POWERBOX ADVANCE users: Sometime between July 2020 and January 2021 Pegasus shipped Advance units that had a small machining error with the M3 threaded accessory holes on the RJ12 port side of the powerbox. The holes were shifted upward 2mm from the bottom. Please see the diagram below for the CORRECT hole pattern. If your Advance has holes that are different than this please contact me after ordering and I will send a special bracket that fits. PLEASE CHECK YOUR ADVANCE BEFORE ORDERING.
Technical Specifications
Compatibility:
| PPB-Bracket |
Pegasus Pocket Powerbox Mounting Bracket |
| PPBMicro-Bracket |
Pegasus Powerbox Micro Mounting Bracket. |
| PPBA-Bracket |
Pegasus Powerbox Advance Mounting Bracket. |
| PUPBv1-Bracket |
Pegasus Ultimate Powerbox (v1) Mounting Bracket. |
| PUPBv2a-Bracket |
Pegasus Ultimate Powerbox (Original v2) Mounting Bracket. |
| PUPBv2b-bracket |
Pegasus Ultimate Powerbox (Second v2) Mounting Bracket. |
| PUSBHub-Bracket |
Fits the Pegasus USB Control Hub (note: only works with the saddle or bar attachments: eg. LSaddle, Synta-Bar-20mm.) |
| PEGUranus-Bracket |
Fits the Pegasus Uranus Mateo Sensor |
Attachment:
Attachments bolt onto the bracket and present several options:
| LSaddle |
Losmandy saddle that clamps onto Losmandy/"D" dovetail bar |
| VSaddle |
V-type saddle that clamps onto a Vixen dovetail bar |
| VBar |
Vixen type bar that slips into a V-type clamp |
| ADM-MDS-Saddle |
ADM Mini Dovetail System saddle that clamps onto a MDS dovetail bar |
| ArcaSwiss-Saddle |
Arca-Swiss saddle that clamps onto an Arca-Swiss rail |
| ArcaSwiss-Bar |
Arca-Swiss bar that slips into an Arca-Swiss clamp |
| Synta-Bar-20mm |
Synta/Vixen bar that slips into a Synta/Vixen finder base, 20mm tall |
| Synta-Bar-50mm |
Synta/Vixen bar that slips into a Synta/Vixen finder base, 50mm tall |
| MiniPC-NUC-85 |
Allows attachment of MiniPCs to an |
| MiniPC-NUC-94 |
Ultimate or Advance Powerbox bracket |
| MiniPC-Beelink-32 |
The numbers are the screw hole spacing on the MiniPC |
| MiniPC-Asus-85 |
MiniPC is bolted directly to the attachment |
| MiniPC-MeLEQ-80 |
MeLE Quieter 2 and 3 MiniPC Mounting Bracket, 80mm Hole Spacing
|
| MiniPC-MeLEPCG35-75 |
MeLE PCG35 MiniPC Mounting Bracket, 75mm/100mm Hole Spacing |
| MiniPC-Giga-80 |
Gigabyte MiniPC Mounting Bracket, 80mm Hole Spacing |
**Note: the MiniPC is bolted directly to the attachment with supplied M3x10mm screws
Note that Attachments can be oriented either direction.
Stacking Note: If you intend to stack a MiniPC on top of a Powerbox Advance or Ultimate, you need to order two sets (bracket + attachment). For example (1) PPBA-Bracket + LSaddle and (1) PPBA-Bracket + MiniPC-NUC-85.
