PrimaluceLab Adapter ESATTO 2"
Adapter ESATTO 2" for ARCO 2" allows you to connect the rotator to ESATTO 2" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 21mm.
PrimaluceLab Adapter ESATTO 2" for GSO/Orion/TPO RC 6 & 8"
If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 152mm f/9 or 203mm f/8 (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. You can use the standard extensions that come with the RC telescope in order to install the focuser at a precise distance from the OTA. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus with your camera.
PrimaluceLab Adapter ESATTO 2" for Large 3.3" SCT Thread
SC 3.3” adapter for ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 77mm of backfocus for your camera and accessories, also when used together with the Celestron EdgeHD .7x focal reducers for 925, 1100 and 1400 models.
PrimaluceLab Adapter ESATTO 2" for SCT Thread
Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Schmidt-Cassegrain telescopes like the 8” and 9.25” Celestron SCT and EdgeHD 800 models. By adding the SC adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus, avoiding focus shift and mirror flop by leaving the primary mirror locked (if locks are available). The low profile of the ESATTO leaves you enough back focus to use the the EdgeHD or other SC threaded focal reducers.
PrimaluceLab Adapter ESATTO 2" for Sky-Watcher/Orion ED80, ED100 & ED120
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion ED80, ED100 or ED120 apochromatic refractors for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. By adding this adapter to ESATTO, your new focuser will have the same thickness of the standard one. Based on the camera and accessories you want to connect, you may need extenders to reach the focus with your camera. Optical thickness of the PL3600230 adapter is 40mm.
PrimaluceLab Adapter ESATTO 2" for Sky-Watcher/Orion Newton 200 f4 & f5
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 200 f4 and f5 reflectors for astrophotography, this adapter allows you to connect ESATTO 2" to these telescopes. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you easily reach prime focus. More, this adapter has the holes for tube installation that correspond to the original ones so it is not necessary to make new holes on the optical tubes. This adapter has screws for adjusting focuser's orthogonality with respect to the optical axis of the telescope in order to perfectly adjust ESATTO to your telescope.
PrimaluceLab Adapter ESATTO 2" for Sky-Watcher/Orion Newton 250 f4 & f5
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 250 f4 and f5 reflector for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you easily reach prime focus. More, this adapter has the holes for tube installation that correspond to the original ones so it is not necessary to make new holes on the optical tubes. This adapter has screws for adjusting focuser's orthogonality with respect to the optical axis of the telescope in order to perfectly adjust ESATTO to your telescope.
In the Box
PrimaluceLab Adapter ESATTO 2"
Warranty & Manuals
PrimaluceLab 1-Year Warranty
