📦 We Have it in Stock? We're on it, shipping your order on the same day. *(Ordered before 1PM & Business Hours only / This is an estimation and may vary)
🛫 If the item is unavailable: It may be in transit to us or on order with the supplier. If not, we will promptly place the order. In case of delays, we will do our best to keep you informed.
The device does not require a USB cable and can be attached directly to the EXT port of these Powerboxes. It can drive a large bipolar or unipolar stepper motor (up to 2Amps per coil) with high precision.
Microstepping
Controller support micro-stepping which can be configured via software to Full, Half, 1/4 step and 1/8 step. This provides additional precision and a smooth rotation from the stepper motor.
Supported Motors
We have successfully tested and controlled the following stepper motors:
Please note that each motor requires its own cable due to different pin-out selection of each manufacturer. * We optionally provide any of these cables. Check cable type SKU at below table.
STEPPER MOTOR
CABLE TYPE
Pegasus Motor Focus (v1 & v2)
Straight RJ45 Network Cable
Starlight HSM 25 / 30 / 35
PEG-CMOT-HSM
Starlight MSM 25 / 30 / 35
PEG-CMOT-MSM
Starizona Micro-Touch
PEG-CMOT-MSM
Rigel nStep Motors
PEG-CMOT-MSM
Moonlite Stepper Motor
PEG-CMOT-RJ45DB9
Robofocus Stepper Motor
PEG-CMOT-RJ45DB9
Lakeside Stepper Motor
PEG-CMOT-RJ45DB9
Lacerta Motor
PEG-CMOT-LCRT
Technical Specifications
Supply Voltage
12V DC Preferred. Accepts 8.2-V to 24V – depends of the motor
Drive Current
2 Amps per motor coil
Motor Compatibility
Unipolar and Bipolar Stepper Motors
Motor Output
RJ45 Socket
Connectivity
RJ12 Socket (Straight RJ12 to RJ12 cable) up to meters
Power Input Connector
2.1mm Centre Positive Socket
Dimensions
66mm x 66mm x 28 mm
In the Box
eXternal Motor Controller 1 x RJ12 to RJ12 – EXT cable (60cm) 1 x 2.1mm to 2.1mm DC cable (1m)