Lunatico Astronomia Dragonfly v. 2.0 Observatory controller

Lunatico Astronomia Dragonfly v. 2.0 Observatory controller

Dragonfly, The Lunatico device to remotely control your roll-off roof observatory, also from your mobile or tablet!

With the new software version, including:

• Relay restrictions (do not close relay if…)
• Roof control from the main panel
• Improved log window
• New DragonflyConfigurator software to manage the internal settings
• New macros, actions the Dragonfly can perform autonomously, very powerful (internet connectivity testing, email / push message sending, wake on lan, relay open / close, sensor checks, etc.)
• Internal clock, with timezone support (useful for macros)
• 3 level password protection
• improved ZeroConf connections
• Log automatically recorded to disk, including any relay activity

… and of course some internal improvements and fixes.

The new hardware addresses some network problems, found mostly at shared observatories with a lot of network activity, and improved relay protection in case of power supply noise.

Top 6 reasons to get a Dragonfly:

1. Smart: can perform operations by itself (for example, send you an email or push message, reboot the router if no internet, WOL, etc…)
2. Smartphones support: custom control app
3. Universal: with ZeroConf, access it from anywhere – no configuration required
4. Versatile: roof open and close operations can be customized. Actions can be launched when a sensor or relay changes.
5. Secure: password protection available (3 levels)
6. Supported: complete ASCOM and INDIGO and INDIlib roof and switch drivers

• switch on and off lights and equipment
• open and close the observatory roof
• control 8 relays (4 of them double NO/NC, and 4 NO)
• monitor the AAG Cloudwatcher and check for safe or unsafe weather conditions
• monitor, using magnet or mechanical sensors the mount’s position, the status of the roof…
• ZeroConfiguration network system
• ASCOM switch & dome interfaces
• Improved internal web server:
• simple page to manage the relays and sensors,
• javascript for web page integration

… ASCOM support is available, and also INDIGO and INDIlib. And with a free application for mobiles and tablets.

Technical Specifications:

• Manages 8 relays (4 of them double NO/NC, and 4 NO), to switch DC or AC
• 8 input sensors: magnet, contact, etc
• Extremely protected against noise
• Direct network connection (ethernet)
• Power supply: 12V (up to 24V is fine), D.C., requires less than 1A, standard 5.5 / 2.1mm jack, positive inside. Important: highly recommended to have the Dragonfly on its own power supply.
• Size: 135 * 61 * 244 mm. box only (total mounted 157 * 70 * 244 mm.)
• Easy installation with DIN rails (optional)

In the Box

• DragonFly controller
• Banana male connector (8 units)

*** Power Supply not included

Manuals & Warranty

Lunatico Astronomia