Mounting Hardware

Pegasus Astro Dovetail Brackets for UPB V2 The Pegasus Astro Dovetail Brackets for UPB V2 allows you to install the Ultimate Powerbox V2 device ont...

Losmandy V Series Side by Side Plate The Losmandy V Series Side by Side Plate incorporates two saddle plates that can mount the Vixen Style or the ...

Losmandy Extra 2.5 lbs Counterweight for DDWS, DWS or WS Systems Losmandy Extra 2.5 lbs Counterweight for DDWS, DWS or WS Systems. Technical Specif...

Losmandy DV Series Three Axis Camera Mount (DVCM2) The Losmandy DV Series Three Axis Camera Mount works with both D and V series plates. Three axis...

Losmandy D Series Dovetail Plate for Celestron 8" The Losmandy D Series Dovetail Plate for Celestron 8" bolts to existing holes. Fits Celestron 8″...

iOptron Counterweight shaft for SkyGuider Pro SkyGuider Pro replacement counterweight shaft. Also can be served as an extension bar.     Counterwei...

Losmandy D Series 14" Male to Male Dovetail Plate Losmandy D Series 14" Male to Male Dovetail Plate. For use of secondary equipment on equatorial m...

Losmandy Club Knob Set The Losmandy Club Knob Set contains one R.A. and one DEC. club knob with three handles at 30 degrees each. Makes clutch knob...

Losmandy Altitude Lock Knob Set Losmandy Altitude Lock Knob Set contains two machined aluminum knobs with stainless steel threaded shafts. Allows t...

Losmandy 7 lbs Counterweight The Losmandy 7 lbs Counterweight is for use on GM 8, G-9, G-11 and Titan mounts. Technical Specification Weight: 7 lb...

Farpoint Losmandy to Vixen Dovetail Assembly Tall Version Safely attach telescope optical tubes with a D size (Losmandy compatible) Dovetail to a ...

Farpoint D Series D-Handle This convenient Farpoint D Series D-Handle with included Farpoint Dovetail Accessory Adapter (FDA) provides a easy way t...

Celestron Dovetail Bar Kit, 11” Narrow This dovetail bar kit allows you to replace the wider CGE dovetail bar found on most Celestron 11” Schmidt-C...

Celestron CGE Universal Mounting Plate The Celestron CGE Universal Mounting Plate is a basic accessory that allows you to attach a wide range of te...

iOptron Star Knobs A set of 3 Star Knobs for the MiniTower/MiniTower II/MiniTower Pro/AZ Mount Pro level adjustment   In the Box iOptron Star Knobs...

iOptron AZ Mount Pro Binocular Adapter Heavy duty binocular adapter for iOptron AZ mount Pro. The diameter of balance shaft is 20mm.   In the Box i...

iOptron AZ Mount Pro Altitude Lock Lever This set of 4 lever allows you to better grip to tighten the AZ Mount Pro altitude lock, especially in the...

iOptron CEM26/GEM28 Ext Bar This is the extension bar for a CEM26/HEM27/GEM28 mount. It attaches to the original bar and will create more counterba...

iOptron CEM26 CW Shaft Mounting House (Low Latitude) CEM26 counterweight shaft mounting house for low latitude (<10 degree). Small counterweight...

iOptron CEM40 CW Shaft Mounting House (Low Latitude)  CEM40 counterweight shaft mounting house for low latitude (~10 degree and lower) To replace t...

Rainbow Astro AP Mach1 Adapter This adapter makes the bottom of the RST-300 and RST-135 mounts the same as the bottom of the AP Mach1 mount.A pier ...

Rainbow Astro Half Pier for Avalon T-POD 90 Half pier compatible with Avalon T-POD 90 tripod.   Technical Specifications Material : Aluminum (AL606...

Rainbow Astro Half Pier for Avalon T-POD 110, 130 Half pier compatible with Avalon T-POD 110, 130 tripods.   Technical Specifications Material : Al...

Rainbow Astro Half pier for iOptron Tri-Pier Half pier compatible with iOptron tripod.   Technical Specifications Material : Aluminum (AL6061)Weigh...

Rainbow Astro Vixen Type Saddle Vixen type Saddle Made in Taiwan    Technical Specifications Weight : 0.22kg   In the Box Rainbow Astro Vixen Type ...

Rainbow Astro 3kg Counter Weight 3kg weight for RST-135 and RST-150H. This prevents the tripod from falling and increases the load capacity of the ...

Rainbow Astro Counter Weight Shaft Shaft for using weights on RST-135 and RST-150H mounts. Technical Specifications 18mm in diameter Made of sta...

iOptron 10kg Counterweight for CEM120 for Low Latitudes <10 Additional 10 kg counterweight for the CEM120 mount made for latitudes under 10.  

iOptron HAZ46 Counterweight Shaft & Adapter   Counterweight balance kit for an HAZ46 mount. It only works when the mount is set at bino mode, i...

Pegasus AVX Universal Adapter for the NYX-101 Mount A pier extension (+18 cm / 7” is available). The pier can be easily constructed by purchasing t...

Starfield Uniplate mount adapter The Starfield Uniplate Mount Adapter is a precision-engineered, CNC-machined aluminum mounting solution designed t...

Pegasus Astro Riser PEG‑RISER‑25 is a precision-machined 25 mm aluminum riser accessory designed to work with Pegasus Astro dovetail systems. It le...

Pegasus Dovetail 335mm Meet the new PegasusAstro Dovetail 335mm in length. Designed with multiple mounting holes, it accommodates a wide range of a...