We Have it in Stock? We're on it, shipping your order on the same day.
*Ordered before 2PM ET & Business Hours only / This is an estimation and may vary
What if the product is not in stock?
🛫 If the item is unavailable: It may be in transit to us or on order with the supplier. If not, we will promptly place the order. In case of delays, we will do our best to keep you informed. Don't hesitate to email us for delays.
🇨🇦 Canadian Authorized Dealer
Buy with confidence from a trusted Canadian astronomy retailer. We provide full pre-sale and after-sale support, expert advice, warranty assistance, and real technical help from passionate astronomers.
Share:
Pegasus Astro Prodigy Microfocuser (PRDG-FOCUSER)
ASTRONOMY PLUS
Pickup available,
Usually ready in 2 hours
3008 Rue Brodeur O Unité 307 Saint Alphonse De Granby QC J0E 2A0 Canada
Pegasus Astro Prodigy Microfocuser (PRDG-FOCUSER)
is backordered and will ship as soon as it is back in stock.
Pegasus Astro Prodigy Microfocuser
* Power cable is optional. CIGLIGHT-ADAPTER21 must be bought separately.
Prodigy is our new 3” robotic microfocuser. It includes the electronics and an accurate motor allowing you to precisely focus your telescope. Its sturdy mechanical design ensures that Prodigy Microfocuser can lift up to 10Kg of equipment, dead accurate and flexure free. Focuser has a 25mm of draw tube travel and a clear aperture of 76mm / 3”. Prodigy includes 2xUSB2 switchableports and 2x12V switchablepower outputs that provide electric “juice” to your equipment close to the focuser (e.g Filter Wheel, Guiding camera etc).
Clear aperture of 3 inches
Prodigy Microfocuser has a clear aperture of 3 inches or 76mm. Its drawtube can travel up to 25mm
Adjustable rotation
Focuser allows adjustable rotation / precise orientation on both sides. This helps you to easily fit the microfocuser to your telescope and also place your camera with the desired orientation.
Innovative design supporting highweight loads
Prodigy Microfocuser is not a Crayford neither a Rack & Pinion type. Its innovative mechanical focus design provides very high load support and accuracy with zero maintenance. Prodigy Microfocuser can easily lift up to 10Kg (22lb) of imaging equipment with zero flex
Zero Motor Backlash
Embedded stepper motor design ensures a smooth, low noise and backlash free operation. V-Curve points during automatic focus procedure are dead accurate.
Available Adapters for many telescopes
Optional adapters for telescope connection are:
Celestron SCT EdgeC11,C14 Can be used to Celestron Edge C 9.25 in combination with Celestron’s focal reducer only. Focal reducer has to be mounted first on the telescope. (SKU: PEG-PRDG-C11)
GSO, Astrotech, Omegon, Altair, TS or similar RC 10”, 12” , 14”, 16” (SKU: PEG-PRDG-GSO117)
GSO, Astrotech, Omegon, Altair, TS or similar RC 8” (SKU: PEG-PRDG-GSO90)
Celestron SCT Edge C11, C14 (SKU: PEG-PRDG-C11) – Can be used with Celestron Edge C 9.25 in combination with Celestron’s focal reducer only. Focal reducer has to be mounted first on the telescope.
GSO, Astrotech, Omegon, Altair, TS or similar RC 10”, 12” , 14”, 16” (SKU: PEG-PRDG-GSO117)
GSO, Astrotech, Omegon, Altair, TS or similar RC 8” (SKU: PEG-PRDG-GSO90) (coming soon)
Takahashi ED-FSQ 85 (coming soon)
Skywatcher ESPRIT 100 (coming soon)
[Stay tuned for more custom adapters] You can also download this 3d step file and modify the telescope side of the adapter based on your needs (aperture / thread and backfocus).
Industrial grade USB Hub and Power Ports
At the side of the focuser you can locate:
2 x USB2 ports allowing the connectivity of equipment close to your focuser such as a Filter Wheel, a guiding camera, a motorized OAG etc.
2 x 12V power outputs Each port can output up to 4Amps
A neat feature to tide up your USB and Power cables. Each of these ports, USB or Power, can be switched ON/ OFF via the supplied software.
Temperature Probe
An external digital temperature sensor input is located on the side of the focuser. A digital temperature sensor is included in the package. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver.
Expansion Port / Manual Focus (optional accessory)
Prodigy has an expansion RJ45 port on the side of the enclosure. This port allows the connectivity of our “upcoming” hand controller for this product.
Standalone program available
Prodigy Microfocuser can be operated by our standalone software. (Only available for Windows OS).
ASCOM and INDI support
Prodigy Microfocuser supports latest ASCOM and INDI framework.
Firmware upgrade support
Firmware supports re-programming via the USB 2.0 connection using upgrade software ((only available for Windows), for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.
Technical Specification
Input Power
Voltage (12- 13.8VDC) / 1.5Amp minimum
Input Socket
2.1mm / up to 10Amps (120W)
Camera Side Mount
Different Adapters Available
Controller
Embedded in device
Thickness
71.7 mm
Drawtube Travel
25 mm
Weight
1.5 Kg
Supported Load
10 Kg
Clear Apperture
76 mm
Stepper Motor
Bipolar Motor with belt reduction
USB Ports
2 x USB2 Switchable (ON/OFF) via software
Power Outputs
2 x 2.1mm Switchable (ON/OFF via software) – 4Amps each port
Step Count
12000 *In Full step drive of motor
In the Box
Prodigy Microfocuser M54 Male to M54 Male Adapter M54 Male to M48 Male Adapter Temperature Sensor (0.6m) USB type B Cable (1.8m) 2 x USB2 (angled) (0.5m length) 2 x 2.1mm Power cord (0.5m length)
You will receive an email when your post is approved
Please leave this popup open whilst your media is uploading
From our customers
Comments
Be the first to comment!
Shop This Post
Price:
Original price:
Your cart
Pegasus
Pegasus Astro Prodigy Microfocuser (PRDG-FOCUSER)
Regular price$1,38600
Unit price
Pegasus Astro Prodigy Microfocuser
* Power cable is optional. CIGLIGHT-ADAPTER21 must be bought separately.
Prodigy is our new 3” robotic microfocuser. It includes the electronics and an accurate motor allowing you to precisely focus your telescope. Its sturdy mechanical design ensures that Prodigy Microfocuser can lift up to 10Kg of equipment, dead accurate and flexure free. Focuser has a 25mm of draw tube travel and a clear aperture of 76mm / 3”. Prodigy includes 2xUSB2 switchableports and 2x12V switchablepower outputs that provide electric “juice” to your equipment close to the focuser (e.g Filter Wheel, Guiding camera etc).
Clear aperture of 3 inches
Prodigy Microfocuser has a clear aperture of 3 inches or 76mm. Its drawtube can travel up to 25mm
Adjustable rotation
Focuser allows adjustable rotation / precise orientation on both sides. This helps you to easily fit the microfocuser to your telescope and also place your camera with the desired orientation.
Innovative design supporting highweight loads
Prodigy Microfocuser is not a Crayford neither a Rack & Pinion type. Its innovative mechanical focus design provides very high load support and accuracy with zero maintenance. Prodigy Microfocuser can easily lift up to 10Kg (22lb) of imaging equipment with zero flex
Zero Motor Backlash
Embedded stepper motor design ensures a smooth, low noise and backlash free operation. V-Curve points during automatic focus procedure are dead accurate.
Available Adapters for many telescopes
Optional adapters for telescope connection are:
Celestron SCT EdgeC11,C14 Can be used to Celestron Edge C 9.25 in combination with Celestron’s focal reducer only. Focal reducer has to be mounted first on the telescope. (SKU: PEG-PRDG-C11)
GSO, Astrotech, Omegon, Altair, TS or similar RC 10”, 12” , 14”, 16” (SKU: PEG-PRDG-GSO117)
GSO, Astrotech, Omegon, Altair, TS or similar RC 8” (SKU: PEG-PRDG-GSO90)
Celestron SCT Edge C11, C14 (SKU: PEG-PRDG-C11) – Can be used with Celestron Edge C 9.25 in combination with Celestron’s focal reducer only. Focal reducer has to be mounted first on the telescope.
GSO, Astrotech, Omegon, Altair, TS or similar RC 10”, 12” , 14”, 16” (SKU: PEG-PRDG-GSO117)
GSO, Astrotech, Omegon, Altair, TS or similar RC 8” (SKU: PEG-PRDG-GSO90) (coming soon)
Takahashi ED-FSQ 85 (coming soon)
Skywatcher ESPRIT 100 (coming soon)
[Stay tuned for more custom adapters] You can also download this 3d step file and modify the telescope side of the adapter based on your needs (aperture / thread and backfocus).
Industrial grade USB Hub and Power Ports
At the side of the focuser you can locate:
2 x USB2 ports allowing the connectivity of equipment close to your focuser such as a Filter Wheel, a guiding camera, a motorized OAG etc.
2 x 12V power outputs Each port can output up to 4Amps
A neat feature to tide up your USB and Power cables. Each of these ports, USB or Power, can be switched ON/ OFF via the supplied software.
Temperature Probe
An external digital temperature sensor input is located on the side of the focuser. A digital temperature sensor is included in the package. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver.
Expansion Port / Manual Focus (optional accessory)
Prodigy has an expansion RJ45 port on the side of the enclosure. This port allows the connectivity of our “upcoming” hand controller for this product.
Standalone program available
Prodigy Microfocuser can be operated by our standalone software. (Only available for Windows OS).
ASCOM and INDI support
Prodigy Microfocuser supports latest ASCOM and INDI framework.
Firmware upgrade support
Firmware supports re-programming via the USB 2.0 connection using upgrade software ((only available for Windows), for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.
Technical Specification
Input Power
Voltage (12- 13.8VDC) / 1.5Amp minimum
Input Socket
2.1mm / up to 10Amps (120W)
Camera Side Mount
Different Adapters Available
Controller
Embedded in device
Thickness
71.7 mm
Drawtube Travel
25 mm
Weight
1.5 Kg
Supported Load
10 Kg
Clear Apperture
76 mm
Stepper Motor
Bipolar Motor with belt reduction
USB Ports
2 x USB2 Switchable (ON/OFF) via software
Power Outputs
2 x 2.1mm Switchable (ON/OFF via software) – 4Amps each port
Step Count
12000 *In Full step drive of motor
In the Box
Prodigy Microfocuser M54 Male to M54 Male Adapter M54 Male to M48 Male Adapter Temperature Sensor (0.6m) USB type B Cable (1.8m) 2 x USB2 (angled) (0.5m length) 2 x 2.1mm Power cord (0.5m length)
Clever tube end covers for my non-standard home-built 10" Newtonian
Clever tube end covers for my non-standard home-built 10" Newtonian. Kind of like shower caps, but they are of heavy-duty material. I haven't yet tested them to see if they will keep out enough light to shoot dark flats, but I think they will be.
Yosmany Castaneda
Excellent camera for "Lucky imaging" of planets
Excellent camera for "Lucky imaging" of planets.
ZWO ASI585MC USB3.0 Color Astronomy Camera - OPEN BOX (ASI585MC)
David W Vandenberg
Excellent Service
Products as described, arrived 3 days before due date.
This is a great deep sky scope, and I am looking forward to getting some great pictures with it, all I need now are some clear skies (it's raining at the moment)
Astronomy Plus Pier Extension for ZWO, iOptron and Sky-Watcher Mounts
Claude Lamarre
ASTRONOMIK MC CLEAR FILTER 2’’ SCT 24 TPI
Se visse directement sur l’adaptateur 2’’ SCT 24 TPI
ASTRONOMIK MC CLEAR FILTER 2’’ SCT 24 TPI
Se visse directement sur l’adaptateur 2’’ SCT 24 TPI , votre dos visuel se visse sur le ASTRONOMIK MC CLEAR FILTER 2’’ SCT 24 TPI.
1) Permet de sceller le tube optique. Une touche de graisse de silicone pure, de qualité, celle pour les équipements de plongée assure l’étanchéité.
2) Empêche les contaminants de s’infiltrer
3) Empêche l’effet cheminée lorsqu’on change un oculaire ou un accessoire par temps froids.
4) Combiné à une isolation thermique de l'OTA un isolant thermique à double face genre REFLECTIX, permet de sortir l’instrument d’un local chauffé vers la température frigide extérieure pour observer immédiatement sans attendre l’équilibrage des températures.
J’ai testé de 25C à 5C, sur deux nuits à l’oculaire clavé 10mm dès l’installation 5 minutes après la sortie de l’instrument, l’image est absolument nette avec seulement la turbulence d’un seeing de 3-4, et ce durant toute la durée de la séance.
Images de Saturne au MK127 de SVBONY F:1500mm, Caméra ZWO ASI 678MC au foyer primaire, Filtre 1.25" Baader contrast boost, capture .SER, Sharpcap, PIPP, AS4!, registax 6.
Les photos sont un stack des images brutes stabilisé de PIPP, et l'autre un léger traitement dans Registax 6.
Le 27 octobre vers 21h30 5 à 10 minutes après avoir sorti l’instrument, viewing 3/5. Hier avec barlow QT 2,25x Baader, résultat similaire. C'est ce que j'espérait, les tests se poursuivre.
Astronomik MC-clear Filter
Darus
Helpful staff and competitive pricing make them a solid choice
Astronomy Plus is a reliable Canadian retailer specializing in telescopes and astrophotography gear.
Their product selection is excellent — everything from smart telescopes like the Seestar series to mounts, cameras, filters, and accessories from top brands. Items arrive in perfect condition and are well-stocked.
Shipping is impressively fast!
Astronomy Plus – Telescopes & Astrophotography Canada
