We Have it in Stock? We're on it, shipping your order on the same day.
*Ordered before 2PM ET & Business Hours only / This is an estimation and may vary
What if the product is not in stock?
🛫 If the item is unavailable: It may be in transit to us or on order with the supplier. If not, we will promptly place the order. In case of delays, we will do our best to keep you informed. Don't hesitate to email us for delays.
🇨🇦 Canadian Authorized Dealer
Buy with confidence from a trusted Canadian astronomy retailer. We provide full pre-sale and after-sale support, expert advice, warranty assistance, and real technical help from passionate astronomers.
Share:
Player One Artemis-C Pro (IMX294) USB3.0 Color Cooled Camera
Camera:Camera
ASTRONOMY PLUS
Pickup available,
Usually ready in 2 hours
3008 Rue Brodeur O Unité 307 Saint Alphonse De Granby QC J0E 2A0 Canada
4504635072
Player One Artemis-C Pro (IMX294) USB3.0 Color Cooled Camera
Player One Artemis-C Pro (IMX294) USB3.0 Color Cooled Camera - Camera
is backordered and will ship as soon as it is back in stock.
Player One Artemis-C Pro (IMX294) USB3.0 Color Cooled Camera
DSO cooled camera line is the most advanced product line in Player One history. We start the project from 2021, through a lot of modify and rebuild we made this final version. It brings our newest technology and design to everyone, we are very proud to introduce this camera line.
Polygon like regular hexagon is very Player One, the DSO cooled cameras we want to make it more beautiful and practical. After a lot of trying, we fix the final style, which uses a scientific and technologicaloctagon to construct the main body line and 4 sides arecambered surface, supplemented by round chamfers to achieve both rigidity and flexibility. The front piece is round to avoid diffraction on RASA. The positive red, which is like a summer fire, is matched with the low-key and steady black, and the super-fine frosting process on the entire surface makes the camera look luxurious and cool, and keep Player One style.
Artemis-C Pro (IMX294) cooled camera is developed by Player One Astronomy, it’s design for advanced DSO imaging. it adoptsSony IMX2944/3″ formatcolor sensor. The4.63um pixel size accommodates a well depth of65.8Kewith a total of 11.7MP (the resolution is 4144*2824),and the diagonal is23.2mm.
Rear Adjustment 4 Point Sensor Tilt Plate
When taking deepsky objects, using sensor tilt plate can get a much smaller field curvature of the telescope. We adopts rear Adjustment and 4 point tilt plate, it has a lot advantages in usage.
4 Point adjustment is easier to know which corner is needed to adjust. The built-in high-density sponge shading pad can block the light from the side slits without any side leakage.
Deep Cooling
Player One cooled camera series use 2 Stage TEC Cooling unit, after improved the structure design to reject the heat back to camera chamber, CameraDelta-Tcan reach over40℃.
512MB DDR3 Cache
As an improvement, DDR3 cache in cooled cameras are increased to 512MB. It helps stabilize and secure data transmission, it effectively avoids frame dropping and greatly reduces readout noise.
With the DDR3 cache, the camera does not have high demands on computing needs any longer, it will still has excellent performance even if it is connected to a USB 2.0 port.
STARVIS Technology
Artemis-C Pro (IMX294) cooled camera based onSony STARVIS technology, it is back-illuminated pixel technology used in CMOS image sensors.
4/3″ Format
Artemis-C Pro cooled camera has 4/3″ format (19.2mm*13mm), this size is very popular for DSO imaging.
14bit ADC
IMX294 sensor has 14-bit on-chip ADC. 14bit (16384 levels)provide higher sample resolution than 12bit (4096 levels).
Type-C Data port and Power port
Back piece of cooled camera has 2 Type-C data port and 12V DC 5.5×2.1mm power port.
Main data port support USB3.0 protocol, the camera can run 33fps under RAW8 mode. Type-C port is easier to plug in when assemble the imaging equipment in night.
When recording images, since the actual writing speed will be affected by the writing speed of the hard disk itself, when the hard disk writing speed is slow, the recording may not reach the theoretical speed. It is recommended that you use a high-quality solid state drive to record data to give full play to the performance of the camera.
The camera has 12V DC5.5*2.1mm port to provide enough power to TEC cooling system. If you don’t need to power up cooling, only need to connect the main Type-C port, the camera will works as a uncooled camera.
Cooling System and Anti-Dew Heater
In ASCOM window, we provide 3 adjustable parameters: Target temperature, Fan Speed and Anti-Dew power.
Standard Delta-T: 40℃(±2℃) , whenambient temp 30℃, fan speed 100%, dew heater 10%.
Recommend Delta-T settings: 35℃ below ambient, fan speed 70%, dew heater 10%, power consumption 40- 60%.
The rotation speed of cooling fan is also adjustable, thedefault value is 70%speed.
Dew problem is the biggest enemy in astro imaging, the camera integrated anti-dew heater in front of the camera. The heat power is adjustable.
Overvoltage and overcurrent protection mechanism
Player One cameras produced by us ensures the safety of your camera and other equipment through overvoltage and overcurrent protection mechanisms.
Performance
At gain=0, the camera has 13 stops dynamic range and 65.8Ke full well capacity, readout noise is 7.8e.
HCG open at gain=120, the camera has 12.97 stops dynamic range and 14.5Ke full well, readout noise drop to only 1.8e.
Frame rate
Artemis-C Pro cooled camera can run 33FPS under RAW8 mode, that’s much faster than existing models on market.
Readout Noise
Regarding readout noise, we solemnly promise that all values are obtained from actual tests. And for users, you could use Sharpcap 4 for testing. SC4 has a function calledSensor Analysis, provide a very simple way to test readout noise.
You will receive an email when your post is approved
Please leave this popup open whilst your media is uploading
From our customers
Comments
Be the first to comment!
Shop This Post
Price:
Original price:
Your cart
Player One
Player One Artemis-C Pro (IMX294) USB3.0 Color Cooled Camera
Regular price$1,25900
Unit price
Player One Artemis-C Pro (IMX294) USB3.0 Color Cooled Camera
DSO cooled camera line is the most advanced product line in Player One history. We start the project from 2021, through a lot of modify and rebuild we made this final version. It brings our newest technology and design to everyone, we are very proud to introduce this camera line.
Polygon like regular hexagon is very Player One, the DSO cooled cameras we want to make it more beautiful and practical. After a lot of trying, we fix the final style, which uses a scientific and technologicaloctagon to construct the main body line and 4 sides arecambered surface, supplemented by round chamfers to achieve both rigidity and flexibility. The front piece is round to avoid diffraction on RASA. The positive red, which is like a summer fire, is matched with the low-key and steady black, and the super-fine frosting process on the entire surface makes the camera look luxurious and cool, and keep Player One style.
Artemis-C Pro (IMX294) cooled camera is developed by Player One Astronomy, it’s design for advanced DSO imaging. it adoptsSony IMX2944/3″ formatcolor sensor. The4.63um pixel size accommodates a well depth of65.8Kewith a total of 11.7MP (the resolution is 4144*2824),and the diagonal is23.2mm.
Rear Adjustment 4 Point Sensor Tilt Plate
When taking deepsky objects, using sensor tilt plate can get a much smaller field curvature of the telescope. We adopts rear Adjustment and 4 point tilt plate, it has a lot advantages in usage.
4 Point adjustment is easier to know which corner is needed to adjust. The built-in high-density sponge shading pad can block the light from the side slits without any side leakage.
Deep Cooling
Player One cooled camera series use 2 Stage TEC Cooling unit, after improved the structure design to reject the heat back to camera chamber, CameraDelta-Tcan reach over40℃.
512MB DDR3 Cache
As an improvement, DDR3 cache in cooled cameras are increased to 512MB. It helps stabilize and secure data transmission, it effectively avoids frame dropping and greatly reduces readout noise.
With the DDR3 cache, the camera does not have high demands on computing needs any longer, it will still has excellent performance even if it is connected to a USB 2.0 port.
STARVIS Technology
Artemis-C Pro (IMX294) cooled camera based onSony STARVIS technology, it is back-illuminated pixel technology used in CMOS image sensors.
4/3″ Format
Artemis-C Pro cooled camera has 4/3″ format (19.2mm*13mm), this size is very popular for DSO imaging.
14bit ADC
IMX294 sensor has 14-bit on-chip ADC. 14bit (16384 levels)provide higher sample resolution than 12bit (4096 levels).
Type-C Data port and Power port
Back piece of cooled camera has 2 Type-C data port and 12V DC 5.5×2.1mm power port.
Main data port support USB3.0 protocol, the camera can run 33fps under RAW8 mode. Type-C port is easier to plug in when assemble the imaging equipment in night.
When recording images, since the actual writing speed will be affected by the writing speed of the hard disk itself, when the hard disk writing speed is slow, the recording may not reach the theoretical speed. It is recommended that you use a high-quality solid state drive to record data to give full play to the performance of the camera.
The camera has 12V DC5.5*2.1mm port to provide enough power to TEC cooling system. If you don’t need to power up cooling, only need to connect the main Type-C port, the camera will works as a uncooled camera.
Cooling System and Anti-Dew Heater
In ASCOM window, we provide 3 adjustable parameters: Target temperature, Fan Speed and Anti-Dew power.
Standard Delta-T: 40℃(±2℃) , whenambient temp 30℃, fan speed 100%, dew heater 10%.
Recommend Delta-T settings: 35℃ below ambient, fan speed 70%, dew heater 10%, power consumption 40- 60%.
The rotation speed of cooling fan is also adjustable, thedefault value is 70%speed.
Dew problem is the biggest enemy in astro imaging, the camera integrated anti-dew heater in front of the camera. The heat power is adjustable.
Overvoltage and overcurrent protection mechanism
Player One cameras produced by us ensures the safety of your camera and other equipment through overvoltage and overcurrent protection mechanisms.
Performance
At gain=0, the camera has 13 stops dynamic range and 65.8Ke full well capacity, readout noise is 7.8e.
HCG open at gain=120, the camera has 12.97 stops dynamic range and 14.5Ke full well, readout noise drop to only 1.8e.
Frame rate
Artemis-C Pro cooled camera can run 33FPS under RAW8 mode, that’s much faster than existing models on market.
Readout Noise
Regarding readout noise, we solemnly promise that all values are obtained from actual tests. And for users, you could use Sharpcap 4 for testing. SC4 has a function calledSensor Analysis, provide a very simple way to test readout noise.
I love the double stack, it was tough to find online, and this was the only store that had it, the shipping was very fast and very well packaged.
Lunt 60mm Ha Etalon Filter (LS60FHaP) - New Gen Etalon
Yosmany Castaneda
Excellent camera for "Lucky imaging" of planets
Excellent camera for "Lucky imaging" of planets.
ZWO ASI585MC USB3.0 Color Astronomy Camera - OPEN BOX (ASI585MC)
David W Vandenberg
Excellent Service
Products as described, arrived 3 days before due date.
This is a great deep sky scope, and I am looking forward to getting some great pictures with it, all I need now are some clear skies (it's raining at the moment)
Astronomy Plus Pier Extension for ZWO, iOptron and Sky-Watcher Mounts
Claude Lamarre
ASTRONOMIK MC CLEAR FILTER 2’’ SCT 24 TPI
Se visse directement sur l’adaptateur 2’’ SCT 24 TPI
ASTRONOMIK MC CLEAR FILTER 2’’ SCT 24 TPI
Se visse directement sur l’adaptateur 2’’ SCT 24 TPI , votre dos visuel se visse sur le ASTRONOMIK MC CLEAR FILTER 2’’ SCT 24 TPI.
1) Permet de sceller le tube optique. Une touche de graisse de silicone pure, de qualité, celle pour les équipements de plongée assure l’étanchéité.
2) Empêche les contaminants de s’infiltrer
3) Empêche l’effet cheminée lorsqu’on change un oculaire ou un accessoire par temps froids.
4) Combiné à une isolation thermique de l'OTA un isolant thermique à double face genre REFLECTIX, permet de sortir l’instrument d’un local chauffé vers la température frigide extérieure pour observer immédiatement sans attendre l’équilibrage des températures.
J’ai testé de 25C à 5C, sur deux nuits à l’oculaire clavé 10mm dès l’installation 5 minutes après la sortie de l’instrument, l’image est absolument nette avec seulement la turbulence d’un seeing de 3-4, et ce durant toute la durée de la séance.
Images de Saturne au MK127 de SVBONY F:1500mm, Caméra ZWO ASI 678MC au foyer primaire, Filtre 1.25" Baader contrast boost, capture .SER, Sharpcap, PIPP, AS4!, registax 6.
Les photos sont un stack des images brutes stabilisé de PIPP, et l'autre un léger traitement dans Registax 6.
Le 27 octobre vers 21h30 5 à 10 minutes après avoir sorti l’instrument, viewing 3/5. Hier avec barlow QT 2,25x Baader, résultat similaire. C'est ce que j'espérait, les tests se poursuivre.
ZWO Seestar S50 Pro. Makes astrophotography easy. Great for beginners looking to get into the hobby. Lightweight and portable. Highly recommend this scope.
1. Construction robuste
2. Assemblage requis : habiletés mécaniques requises, particulièrement les précautions et les méthodes et ordres de serrage sécuritaire des vis Allen. Certaines vis sont difficiles à desserrer ou à serrer adéquatement.
3. Montage configurable selon les préférences de l’observateur :
a. Orientation à droite ou à gauche du module d’altitude à queue d’aronde
b. Orientation des câbles d’ajustement fins selon les préférences de l’observateur en démontant et réorientant soit le bloc de queue d’aronde pour l’altitude, soit en démontant et réorientant la base du module d’altitude, pour le câble d’azimuts.
c. Dans sa position verticale, la monture permet d’orienter l’instrument entre -60° à +60 d’altitude, les objets au zénith ne sont pas accessibles. Il est possible de monter en diagonale l’axe d’altitude, le zénith devient accessible, mais le centre de gravité de la monture se trouve déplacé, attention.
d. Les ajustements fins procurent un mouvement très doux et constant.
e. Les manettes de verrouillages des axes sont ajustables dans une position confortable par un mécanisme à ressort qui permet d’orienté les manettes.
f. Le verrouillage des axes ne verrouille que les déplacements rapides et n’affecte pas les réglages fins par flexibles qui sont des mécanismes indépendants.
4. S’adapte parfaitement au trépied Sky-Watcher Star adventurer
5. Comme toujours un manuel d’instruction mal rédigé avec traductions douteuse ou simplement laissée en anglais.
6. Un accessoire présent dans la boîte qui n’est pas dans le manuel, c’est une barre butoir qui protège contre les dommages possibles au tube optique si l’observateur ajuste l’altitude rapidement sans se méfier au-delà du +60°. Le butoir empêche le tube de frapper la base de la monture en bloquant le mouvement.
7. Monture idéale pour mon SA401 100mm APO ED dédié aux observations de la nature et occasionnellement des observations astronomiques.
8. Pour éviter que les manettes de réglage fin ne se desserrent, j'ai ajouté une gaine thermorétractable sur l'embout en laiton où se connectent les flexibles. Une fois vissées, les manettes restent bien en place.
This 80 mm F5 telescope is very impressive
Pros. Excellent optics very light weight
Cons. Tripod and finder scope are almost unusable. Change to a 90 degree diagonal and purchase a better quality tripod
Still well worth the money. May be buying a second one
J’ai échangé mon S50 pour le nouveau S50 Pro et je suis très satisfait. De plus, l’application est régulièrement mise à jour pour offrir plus de possibilités et de facilité. J’adore l’utiliser pour empiler des photos d’astres lointaines pendant que je fais de l’observation visuelle avec mon SCT.