ZWO ASI183MC Pro Color
ASI183MC Pro uses Sony’s IMX183CQJ-J sensor. With a high QE-value and low provides excellent image quality at an affordable price. Someof the features include:
- 20 megapixel sensor with 2.4 μm pixel size. – able to capture19 frames/s frame rate in 12-bit mode with high detail
- Very low 6e- readout noise – bringing out more details in your images with improved dynamic range
- Full-well capacity of 15ke– – reduces the risk of oversaturated stars in longer exposures
IMX183CLK-J/CQJ-J
Diagonal 15.86 mm Approx. 20.48M-Effective Pixel Monochrome/Color CMOS Image Sensor
High-Speed and High-Picture-Quality Rolling Shutter-Type Back-Illuminated CMOS Image Sensors
In the astronomic application field, Sony IMX183CLK-J (monochrome) and IMX183CQJ-J (color) sensors uses a very high sensitivity back-illuminated structure with high resolution 2.4 μm square unit pixel. The optical size is 1 inch.
USB3.0 & 256M DDR3 Memory
The ASI183 Pro camera includes a 256MB DDR3 memory buffer to help improve data transfer reliability. Additionally, the use of a memory buffer minimizes amp-glow, which is caused by the slow transfer speeds when the camera is used with a USB 2.0 port.
Astrophotography Performance
The ASI183 cameras has a very large full well capacity（15000e） for such small pixel size, 1.6e read noise @ 30DB, and 12stops dynamic range @ Gain=0. The ASI183 cameras also utilize firmware features to minimize amplifier glow for maximum performance in astrophotography.
Reliable Mechanics
ASI183 Pro has same mechanics as ASI1600 Pro. There are four screws that seal the sensor chamber. Our camera design has been extensively tested and is very stable.
Even when used in higher humidity environments, ASI183 Pro will still work fine without dew problems.
High Speed
Fast FPS can be used in solar and lunar imaging, as well as for live viewing/EAA.The high speed readout may also be used for real-time focusing, true lucky imaging of double stars and other small objects, planetary imaging of the major planets in the solar system, and much more.
10Bit ADC
| 5496×3672 |
19fps |
| 3840×2160 |
41.04fps |
| 1920×1080 |
80.10fps |
| 1280×720 |
117.30fps |
12bit ADC
| 5496×3672 |
19fps |
| 3840×2160 |
36.12fps |
| 1920×1080 |
70.48fps |
| 1280×720 |
103.23fps |
High QE
Sony’s back-illuminated Exmor R technology, giving it excellent Deep Sky performance. ASI183 QE peak reaches a remarkable 84%. In Ha channel, QE is still over 60%.
Having high QE means more of the light that enters your telescope and reaches the sensor is actually used. With 84% peak Q.E. and no less than ~50% within the visible spectrum, the ASI183 will utilize a high percentage of the light that reaches it, improving your signal quality.
Dark Current
The dark current of the ASI183 is extremely low, based on our test results. Dark frame sample @ Highest dynamic range settings(gain=0), 300s, -10°C, bin1. Please check the dark frame to make sure you are fully know the performance.
USB 3.0 Port & USB2.0 HUB
USB 3.0 Port: Provide 5Gb bandwidth to make it possible for ASI183 Pro to run at 19 fps (12bit, normal mode) or 19 fps (10bit, high speed mode) at full resolution(20.18Mega).
USB 2.0 HUB: can connect with various accessories, such as filter wheel, guide camera and electronic focuser, so you can better manage your cables. The ASI183 Pro includes two short 0.5m USB 2.0 cables. The integrated USB 2.0 hub is powered by the external power source if you connect one.
Cooling System
The ASI183 Pro has a 2-stage TEC cooling system that enables deep cooling (35°C-40°C below ambient). The cooler requires an external power supply, which is not included with the camera.
Recommended cooler power supply: 12V @ 3-5A (or more) DC adapter (2.1×5.5mm, center pole positive). Also suitable: DC battery with 9-15V.
Using a battery 9-15V is also suitable for the cooler power supply.
The best solution of 55mm back focus length
Connecting Diagram
- M43-T2 adapter (optional)
- EOS-T2 adapter (optional)
- 2” Filter (optional)
- 1.25” T-Mount
- 1.25” Filter (optional)
- M42-1.25” adapter
- T2 extender 11mm
Technical Specifications
| Sensor |
1″ CMOS IMX183CLK-J/CQJ-J |
| Diagonal |
15.9mm |
| Resolution |
20Mega Pixels 5496*3672 |
| Pixel Size |
2.4μm |
| Bayer Pattern |
RGGB |
| Shutter |
Rolling shutter |
| Exposure Range |
32µs-2000s |
| ROI |
Supported |
| Read Noise |
1.5-3.0e |
| QE peak |
84% |
| Full well |
15ke |
| ADC |
12bit |
| DDRIII Buffer |
256MB |
| Non-volatile memory/On camera storage |
Build-in total 192K byte user-accessible space(image size up to 480X320) |
| Interface |
USB3.0/USB2.0 |
| Adaptor |
M42X0.75 |
| Protect window |
D32-2-AR |
| Dimensions |
78mm Diameter |
| Weight |
410g |
| Back Focus Distance |
6.5mm |
| Cooling |
Regulated Two Stage TEC |
| Delta T |
40°C-45°C below ambient |
| Camera Power consumption |
650mA at 5V |
| Cooler Power consumption |
12V at 3A Max |
| Working Temperature |
-5°C—45°C |
| Storage Temperature |
-20°C—60°C |
| Working Relative Humidity |
20%—80% |
| Storage Relative Humidity |
20%—95% |
| Max FPS at full resolution |
10Bit ADC
5496×3672 19fps
3840×2160 41.04fps
1920×1080 80.10fps
1280×720 117.30fps
640×480 169.92fps
320×240 308.17fps12bit ADC
5496×3672 19fps
3840×2160 36.12fps
1920×1080 70.48fps
1280×720 103.23fps
640×480 149.53fps
320×240 271.19fps |
In the Box
- Camera
- Camera Bag
- 1.25″ T-Mount
- 2m USB3.0 Cable
- 2x 0.5m USB2.0 Cable
- T2-M48 16.5mm Adapter
- T2 21mm Adapter
- M42-M48 Adapter
- T2-1.25″ Filter adapter
- 1.25″ Cover
- 2x Spacers
Manuals & Warranty
ZWO 2-Years Warranty
ZWO ASI183 Manual
ZWO ASI Color Cameras Back Focus Solution
ZWO ASI183MC-Pro Mechanical Drawing
