Mounting Hardware

ADM D Series 3.5 lbs Counterweight with 5" Threaded Rod The ADM D Series 3.5 lbs Counterweight with 5" Threaded Rod fits D Series dovetail bars and...

ADM D Series 150mm Adjustable Ring Set The ADM D Series 150mm Adjustable Ring Set fits D Series dovetail bars. Includes two 150mm (ID) adjustable g...

ADM D Series 11" Universal Dovetail Bar 60mm Spacing The ADM D Series 11" Universal Dovetail Bar 60mm Spacing fits D Series saddles and accessories...

Tele Vue SCT Bracket The Tele Vue SCT Bracket should be permanently installed on the desired area of your SCT using screws supplied with the SCT. T...

Tele Vue Mount Handle Assembly The Tele Vue Mount Handle Assembly is standard on Tele Pod and Panoramic mounts and can be added as an option to old...

Tele Vue Eyepiece Caddy Set These sleek little brackets attach with thumb screws, to the yoke arms of all Tele Vue mount heads, keeping your eyepie...

Tele Vue 5" Mounting Ring Set The Tele Vue 5″ Mounting Ring Set provides rigid mounting for astro-imaging with our 4″ scopes. Bottom and top of eac...

Sky-Watcher Dovetail 180mm Universal D-plate 7" (180mm) Losmandy style D-plate Numerous holes for mounting on a wide variety of telescopes Anodize...

PrimaluceLab EQ6, Atlas EQ-G, AZ-EQ6, Atlas Pro AZ/EQ6-G PLUS Adapter Plate PrimaluceLab EQ6, Atlas EQ-G, AZ-EQ6, Atlas Pro AZ/EQ6-G PLUS Adapter P...

PrimaluceLab DV Series Maxi Dovetail Clamp PLUS The PrimaluceLab DV Series Maxi Dovetail Clamp PLUS provides the connection to telescopes support p...

Pegasus Astro Universal L Bracket The Pegasus Astro Universal L Bracket, hard to bend, has cut rails and can be attached to a wide range of focuser...

Pegasus Astro Dovetail Brackets for UPB V2 The Pegasus Astro Dovetail Brackets for UPB V2 allows you to install the Ultimate Powerbox V2 device ont...

Losmandy V Series Side by Side Plate The Losmandy V Series Side by Side Plate incorporates two saddle plates that can mount the Vixen Style or the ...

Losmandy G11 RA Extension Kit The Losmandy G11 RA Extension Kit is used to allow a Meridian Flip Through on the G11 mount. This is done by adding a...

Losmandy Extra 2.5 lbs Counterweight for DDWS, DWS or WS Systems Losmandy Extra 2.5 lbs Counterweight for DDWS, DWS or WS Systems. Technical Specif...

Losmandy DV Series Three Axis Camera Mount (DVCM2) The Losmandy DV Series Three Axis Camera Mount works with both D and V series plates. Three axis...

Losmandy DV Series 2.5 lbs Counterweight with 5" Threaded Rod The Losmandy DV Series 2.5 lbs Counterweight with 5" Threaded Rod. Works with both D ...

Losmandy D Series Dovetail Plate for Celestron 8" The Losmandy D Series Dovetail Plate for Celestron 8" bolts to existing holes. Fits Celestron 8″...

Losmandy D Series Dovetail Plate for Celestron 14" The Losmandy D Series Dovetail Plate for Celestron 14" bolts to existing holes. Fits Celestron ...

iOptron Counterweight shaft for SkyGuider Pro SkyGuider Pro replacement counterweight shaft. Also can be served as an extension bar.     Counterwei...

Losmandy D Series 14" Male to Male Dovetail Plate Losmandy D Series 14" Male to Male Dovetail Plate. For use of secondary equipment on equatorial m...

Losmandy Club Knob Set The Losmandy Club Knob Set contains one R.A. and one DEC. club knob with three handles at 30 degrees each. Makes clutch knob...

Losmandy Altitude Lock Knob Set Losmandy Altitude Lock Knob Set contains two machined aluminum knobs with stainless steel threaded shafts. Allows t...

Losmandy 7 lbs Counterweight The Losmandy 7 lbs Counterweight is for use on GM 8, G-9, G-11 and Titan mounts. Technical Specification Weight: 7 lb...

Losmandy 4" Tripod Extension The Losmandy 4" Tripod Extension fits to the top of LW-Tripod, HD-Tripod, MA. Technical Specification Height: 4″ In t...

Losmandy 21 lbs Counterweight The Losmandy 21 lbs Counterweight is for use on GM8, G9, G11 and Titan mounts. Technical Specification Weight: 21 lb...

Farpoint Losmandy to Vixen Dovetail Assembly Tall Version Safely attach telescope optical tubes with a D size (Losmandy compatible) Dovetail to a ...

Farpoint D Series D-Handle This convenient Farpoint D Series D-Handle with included Farpoint Dovetail Accessory Adapter (FDA) provides a easy way t...

Celestron Dovetail Bar Kit, 11” Narrow This dovetail bar kit allows you to replace the wider CGE dovetail bar found on most Celestron 11” Schmidt-C...

Celestron Counterweight, 17 lbs For 19mm Shaft Whether you are enhancing your mount setup or buying a replacement part, the counterweight is there ...

Celestron CGE Universal Mounting Plate The Celestron CGE Universal Mounting Plate is a basic accessory that allows you to attach a wide range of te...

Antares Finderscope Bracket Mount Mounting shoe for finderscope brackets and other accessories. FURB is a receiving shoe for dovetail accessories. ...

Astronomy Plus 10KG Stainless Steel Counterweight fo 25mm and 28mm bars Precision-machined from 304 stainless steel, this 10KG counterweight featur...

Astronomy Plus 5KG Stainless Steel Counterweight fo 25mm and 28mm bars Precision-machined from 304 stainless steel, this 5KG counterweight features...