Losmandy

Celestron G11 Equatorial Mount made by Losmandy with Tripod USED Motorised, but not GOTO. Sold as is. In the Box Celestron G11 Equatorial Mount m...

Losmandy 11 lbs Counterweight The Losmandy 11 lbs Counterweight is for use on GM 8, G-9, G-11 and Titan mounts. Technical Specification Weight: 11...

Losmandy 12" Tripod Extension The Losmandy 12" Tripod Extension fits to the top of LW-Tripod, HD-Tripod, MA. Technical Specification Height: 12″ I...

Losmandy 21 lbs Counterweight The Losmandy 21 lbs Counterweight is for use on GM8, G9, G11 and Titan mounts. Technical Specification Weight: 21 lb...

Losmandy 4" Tripod Extension The Losmandy 4" Tripod Extension fits to the top of LW-Tripod, HD-Tripod, MA. Technical Specification Height: 4″ In t...

Losmandy 6" Riser for AZ8 Mount Losmandy 6" Riser for AZ8 Mount Technical Specification Height: 6″ In the Box AZ8 riser Manual & Warranty Los...

Losmandy 7 lbs Counterweight The Losmandy 7 lbs Counterweight is for use on GM 8, G-9, G-11 and Titan mounts. Technical Specification Weight: 7 lb...

Losmandy 8" Tripod Extension The Losmandy 8" Tripod Extension fits to the top of LW-Tripod, HD-Tripod, MA. Technical Specification Height: 8″ In t...

Losmandy Altitude Lock Knob Set Losmandy Altitude Lock Knob Set contains two machined aluminum knobs with stainless steel threaded shafts. Allows t...

Losmandy AZ8 Alt/Az Mount with Tripod The Losmandy AZ8 Alt-Az Dual Head Mount: Scott Losmandy's reputation for precision design and production of m...

Losmandy AZ8 Weight System The Losmandy AZ8 Weight System is used to balance the system when only one telescope is used. In the Box Vixen Bar wit...

Losmandy Club Knob Set The Losmandy Club Knob Set contains one R.A. and one DEC. club knob with three handles at 30 degrees each. Makes clutch knob...

Losmandy Clutch Pads for G11 Mount (CP11) Clutch pads for G11, Set of 2 0.5mm PLDE Plastic Clutchpads for newer Losmandy mounts (Old Thicker 0...

Losmandy Counterweight Shaft Extension The Losmandy Short Counterweight Shaft is used on heavier setups. For use on GM 8, G-9, G-11, G11GT. 8 inch ...

Losmandy D Series 14" Male to Male Dovetail Plate Losmandy D Series 14" Male to Male Dovetail Plate. For use of secondary equipment on equatorial m...

Losmandy D Series 14" Universal Dovetail Plate The Losmandy D Series 14" Universal Dovetail Plate. For use on Astro Physics, Astro-Tech, Borg, Cele...

Losmandy D Series 19" Universal Dovetail Plate The Losmandy D Series 19" Universal Dovetail Plate fits: Meade 8, Celestron 8, Meade 7, Celestron 9....

Losmandy D Series 24" Universal Dovetail Plate The Losmandy D Series 24″ Universal Dovetail Plate fits: Meade 8, Celestron 8, Meade 7, Celestron 9....

Losmandy D Series 7" Male to Male Dovetail Plate Losmandy D Series 7" Male to Male Dovetail Plate. For use of secondary equipment on equatorial mou...

Losmandy D Series 7" Universal Dovetail Plate The Losmandy D Series 7″ Universal Dovetail Plate fits Astro Physics, Astro-Tech, Borg, Celestron, Ex...

Losmandy D Series Astro-Physics Ring Dovetail Plate The Losmandy D Series Astro-Physics Ring Dovetail Plate is essentially a DUP14 plate with addit...

Losmandy D Series Dovetail Plate for Celestron 11" The Losmandy D Series Dovetail Plate for Celestron 11" bolts to existing holes. Fits Celestron ...

Losmandy D Series Dovetail Plate for Celestron 14" The Losmandy D Series Dovetail Plate for Celestron 14" bolts to existing holes. Fits Celestron ...

Losmandy D Series Dovetail Plate for Celestron 8" The Losmandy D Series Dovetail Plate for Celestron 8" bolts to existing holes. Fits Celestron 8″...

Losmandy D Series Dovetail Plate for Celestron 9.25" The Losmandy D Series Dovetail Plate for Celestron 9.25" bolts to existing holes. Fits Celest...

Losmandy D Series Dovetail Plate for Meade 10" The Losmandy D Series Dovetail Plate for Meade 10" bolts to existing holes. Fits Meade 10″ OTA’s Bo...

Losmandy D Series Dovetail Plate for Meade 12" The Losmandy D Series Dovetail Plate for Meade 12" bolts to existing holes. Also used for the LX850 ...

Losmandy D Series Dovetail Plate for Meade 14" The Losmandy D Series Dovetail Plate for Meade 14" bolts to existing holes. Also used for the LX850 ...

Losmandy D Series Dovetail Plate for Meade 16" F/10 The Losmandy D Series Dovetail Plate for Meade 16" F/10 bolts to existing holes. Fits Meade 16...

Losmandy D Series Dovetail Plate for Meade 16" F/8 The Losmandy D Series Dovetail Plate for Meade 16" F/8 bolts to existing holes. Fits Meade 16″ ...

Losmandy D Series Dovetail Plate for Meade 7" Mak The Losmandy D Series Dovetail Plate for Meade 7" Mak bolts to existing holes. Fits Meade 7″ Mak...

Losmandy D Series Dovetail Plate for Meade 8" The Losmandy D Series Dovetail Plate for Meade 8" bolts to existing holes. Fits Meade 8″ OTA’s Bolts...

Losmandy D Series Plate to DV Series Saddle Plate The Losmandy D Series Plate to DV Series Saddle Plate is a male D Series Plate to Female DV Serie...

Losmandy D Series Side by Side Plate The Losmandy D Series Side by Side Plate incorporates two saddle plates mounted parallel to each other. Used f...

Losmandy DV Series 108mm Guide Scope Rings The Losmandy DV Series 108mm Guide Scope Rings work with both Losmandy D  Style and V Series Vixen Style...

Losmandy DV Series 108mm/66mm Guide Scope Rings The Losmandy DV Series 108/66mm Guide Scope Rings work with both Losmandy D  Style and V Series Vix...