Telescope Accessories

PrimaluceLab EQ6, Atlas EQ-G, AZ-EQ6, Atlas Pro AZ/EQ6-G PLUS Adapter Plate PrimaluceLab EQ6, Atlas EQ-G, AZ-EQ6, Atlas Pro AZ/EQ6-G PLUS Adapter P...

Pegasus Stepper Motor Cable for Starlight MSM / Rigel Motor RJ45 to RJ11 (Custom Pinout) Length: 1m Compatible with: Starlight MSM Motors Rig...

PrimaluceLab DV Series Maxi Dovetail Clamp PLUS The PrimaluceLab DV Series Maxi Dovetail Clamp PLUS provides the connection to telescopes support p...

Pegasus Astro UPB & PPB Power Cable for Sky-Watcher EQ8 The Pegasus Astro UPB & PPB Power cable for Sky-Watcher EQ8 allows you to power you...

Pegasus Astro Universal L Bracket The Pegasus Astro Universal L Bracket, hard to bend, has cut rails and can be attached to a wide range of focuser...

PrimaluceLab 1.0m EAGLE Power Cable Extension Cord The PrimaluceLab 1.0m EAGLE Power Cable Extension Cord is used when you need a longer cable to p...

PrimaluceLab 0.5m EAGLE Power Cable Extension Cord The PrimaluceLab 0.5m EAGLE Power Cable Extension Cord is used when you need a longer cable to p...

Pegasus Astro High Accuracy Digital Temperature/Humidity Sensor for DewMaster The Pegasus Astro High Accuracy Digital Temperature/Humidity Sensor f...

Pegasus Astro Dovetail Brackets for UPB V2 The Pegasus Astro Dovetail Brackets for UPB V2 allows you to install the Ultimate Powerbox V2 device ont...

Lunt B1200 Blocking Filter BLOCKING FILTERS ARE REQUIRED ON ALL LUNT SOLAR SYSTEMS The Lunt B1200 Blocking Filter is recommended for imaging use on...

Pegasus Astro 2.5X5.5mm Female to XT60 Male Adapter for Power Supply Unit Pegasus Astro 2.5X5.5mm Female to XT60 Male Adapter for Power Supply Unit...

iOptron Vibration suppression feet (LiteRoc & 2" Tripod) Vibration suppression foot set for iOptron LiteRoc and 2" tripods. Fits on these tripo...

iOptron USB Cable A standard iOptron USB Cable USB2.0 for firmware upgrade and computer control of a mount. The cable may not be compatible for oth...

iOptron RS232-RJ9 Cable iOptron RS232 to RJ9 serial cable is used for firmware upgrade (hand controller and/or control boards), mount computer cont...

Losmandy V Series Side by Side Plate The Losmandy V Series Side by Side Plate incorporates two saddle plates that can mount the Vixen Style or the ...

Losmandy Polar Scope Finder The Losmandy Polar Scope Finder is for GM 8, G-9 and G-11 mounts and the StarLapse system. Works in Northern or Souther...

Losmandy GPS for Gemini 2 System The Losmandy GPS for Gemini 2 System plugs into port 1 on Gemini 2 system. In the Box Garmin GPS for Gemini 2 Ma...

Losmandy G11 RA Extension Kit The Losmandy G11 RA Extension Kit is used to allow a Meridian Flip Through on the G11 mount. This is done by adding a...

Losmandy Extra 2.5 lbs Counterweight for DDWS, DWS or WS Systems Losmandy Extra 2.5 lbs Counterweight for DDWS, DWS or WS Systems. Technical Specif...

Losmandy DV Series Three Axis Camera Mount (DVCM2) The Losmandy DV Series Three Axis Camera Mount works with both D and V series plates. Three axis...

Losmandy DV Series 2.5 lbs Counterweight with 5" Threaded Rod The Losmandy DV Series 2.5 lbs Counterweight with 5" Threaded Rod. Works with both D ...

Losmandy D Series Dovetail Plate for Celestron 8" The Losmandy D Series Dovetail Plate for Celestron 8" bolts to existing holes. Fits Celestron 8″...

Losmandy D Series Dovetail Plate for Celestron 14" The Losmandy D Series Dovetail Plate for Celestron 14" bolts to existing holes. Fits Celestron ...

Losmandy D Series Dovetail Plate for Celestron 11" The Losmandy D Series Dovetail Plate for Celestron 11" bolts to existing holes. Fits Celestron ...

iOptron Counterweight shaft for SkyGuider Pro SkyGuider Pro replacement counterweight shaft. Also can be served as an extension bar.     Counterwei...

Losmandy D Series 14" Male to Male Dovetail Plate Losmandy D Series 14" Male to Male Dovetail Plate. For use of secondary equipment on equatorial m...

Losmandy Club Knob Set The Losmandy Club Knob Set contains one R.A. and one DEC. club knob with three handles at 30 degrees each. Makes clutch knob...

Losmandy Altitude Lock Knob Set Losmandy Altitude Lock Knob Set contains two machined aluminum knobs with stainless steel threaded shafts. Allows t...

Losmandy 7 lbs Counterweight The Losmandy 7 lbs Counterweight is for use on GM 8, G-9, G-11 and Titan mounts. Technical Specification Weight: 7 lb...

Losmandy 4" Tripod Extension The Losmandy 4" Tripod Extension fits to the top of LW-Tripod, HD-Tripod, MA. Technical Specification Height: 4″ In t...

Losmandy 21 lbs Counterweight The Losmandy 21 lbs Counterweight is for use on GM8, G9, G11 and Titan mounts. Technical Specification Weight: 21 lb...

iOptron AC Adapter 12V DC power supply for iOptron telescope mounts. AC Input: 100V to 240V, DC Output: 12V 5A Rated for 60 Watts DC plug: center-...

Howie Glatter 1.25"-2" Laser Collimator When I started manufacturing laser collimators I realized that in order to produce consistent and accurate ...

HoTech 1.25" SCA Dot Laser Collimator The HoTech 1.25" SCA Dot Laser Collimator separates itself from all other laser collimators with its innovati...