Ikarus StellarMate Pro X (8GB / 256GB)
StellarMate Pro X is a next-generation, professional astrophotography controller powered by an Intel N100 12th Gen Quad-Core processor. Equipped with 8GB RAM, 256GB NVMe SSD storage, built-in smart power distribution, and ultra-fast WiFi 6, it delivers seamless wireless command over your entire imaging setup—from mounts and cameras to dew heaters and focusers.
Key Highlights:
-
High Performance: Intel N100 Quad-Core CPU, 8GB LPDDR5 RAM, and 256GB NVMe SSD.
-
Smart Power Hub: Integrated software-controlled 12V DC, PWM Dew Heater, and Stepper Motor outputs.
-
Advanced Connectivity: WiFi 6, Bluetooth 5.3, integrated GPS, and Gigabit Ethernet.
-
Self-Contained OS: Powered by StellarMate OS with pre-loaded KStars, Ekos, and full INDI driver support.
The StellarMate Pro X is a high-performance, professional-grade astrophotography controller powered by the 12th Gen Intel N100 Quad-Core processor platform.
Designed specifically for demanding deep-sky imaging and complex multi-camera setups, it combines Intel UHD Graphics, ultra-fast 8 GB LPDDR5 RAM, high-endurance 256 GB NVMe solid-state storage, and an integrated smart power distribution board into a rugged CNC enclosure.
Driven by StellarMate OS—a custom Linux distribution pre-loaded with KStars, Ekos, and the complete INDI driver ecosystem—it offers a completely self-contained astronomy command center accessible remotely via WiFi 6 or Gigabit Ethernet from your phone, tablet, or PC.
Power Distribution System
StellarMate Pro X incorporates a dedicated power distribution board that delivers regulated, switched, PWM, and variable outputs. Every port is individually controllable through the StellarMate App or Ekos Power Manager.
Power Input
-
Input Options: Industrial XT-60 12 V DC input (10A)
-
Operating Voltage: 12 V DC nominal (11 V–13 V operating range)
-
Included Cables: 2x 5.5 x 2.1 mm DC barrel adapter cables
Auxiliary Sensor Port
-
Port Type: External Sensor Interface
-
Typical Applications: Temperature/humidity sensors, sky quality meters, environmental sensors
Power Output Summary
| Port |
Qty |
Voltage / Type |
Control Type |
Typical Application |
| DC Out |
4x |
12 V DC (Max 3A) |
Software On/Off |
Mount, primary camera, focuser, accessories |
| DEW Out |
2x |
12 V PWM (Max 3A) |
Duty cycle (0–100%) |
Dew heaters, variable-speed fans |
| Variable Out |
1x |
3–9 VDC adjustable (Max 3A) |
Software controlled |
Guide camera, electronic eyepiece, low-voltage gear |
| Stepper Out |
1x |
Stepper signal |
Step/Dir protocol |
Motorized focuser / stepper accessories |
|
USB-C PD v3.0
|
1x
|
60W
|
Always on. PD negotiable.
|
External auxiliary equipment requiring power.
|
High-Speed Connectivity & Wireless
-
USB 3.2 Ports (4x): High-speed data transfer for main cooled astronomy cameras, high-res guide cameras, and rapid frame transfers. 1.5A Max current per port.
-
USB 2.0 Ports (2x): Dedicated connection for focusers, filter wheels, mount adapters, and dongles. 0.5A Max current per port.
-
WiFi 6 & Bluetooth 5.3: Dual-band coverage (2.4 GHz / 5 GHz) for zero-lag remote imaging in crowded wireless environments. 2x2 MIMO High Gain Antennas.
-
GPS Receiver: External SMA port (antenna included) for instant precise location coordinates and UTC time synchronization. Active GPS Antenna support.
-
Gigabit Ethernet: 10/100/1000 Mbps RJ-45 port for ultra-smooth EkosLive streaming and direct wired network setup.
Technical Specifications
| Parameter |
Specification |
| Operating System |
StellarMate OS (KStars, Ekos, and INDI pre-installed) |
| Processor |
Intel N100 12th Gen Quad-Core Processor |
| Graphics |
Intel UHD Graphics |
| Memory (RAM) |
8 GB LPDDR5 |
| Storage |
256 GB NVMe SSD |
| Wireless (WiFi) |
WiFi 6 (802.11ax) - 2.4 GHz / 5 GHz / 2x2 MIMO tri-band |
| Bluetooth |
Bluetooth 5.3 |
| GPS |
Integrated GPS with external SMA antenna port |
| Wired Network |
Gigabit Ethernet (RJ-45) |
| USB Ports |
4x USB 3.2, 2x USB 2.0, 1x USB-C (60W PD support) |
| 12 V DC Power Output |
4x 12 V DC ports (software-controlled) |
| Dew Heater Ports |
2x Dew heater ports (PWM variable control) |
| Variable DC Output |
1x Adjustable 3–9 VDC output |
| Stepper Motor Control |
1x Dedicated stepper motor output port |
| Auxiliary I/O |
1x External environmental sensor port |
| Mounting Options |
Vixen V5 and Losmandy D-series dovetail compatible |
| Regulatory Info |
Contains FCC TX ID: TX2-RTL8852CE |
Power Output Summary
| Port |
Qty |
Voltage / Type |
Control Type |
Typical Application |
| DC Out |
4x |
12 V DC (Max 3A) |
Software On/Off |
Mount, primary camera, focuser, accessories |
| DEW Out |
2x |
12 V PWM (Max 3A) |
Duty cycle (0–100%) |
Dew heaters, variable-speed fans |
| Variable Out |
1x |
3–9 VDC adjustable (Max 3A) |
Software controlled |
Guide camera, electronic eyepiece, low-voltage gear |
| Stepper Out |
1x |
Stepper signal |
Step/Dir protocol |
Motorized focuser / stepper accessories |
|
USB-C PD v3.0
|
1x
|
60W
|
Always on. PD negotiable.
|
External auxiliary equipment requiring power.
|
In the Box
- StellarMate Pro X Astrophotography Controller
- Male XT-60 to 12v DC Female 5.5x2.5 mm Adapter (DC 5525).
- 50cm & 100cm male-male DC Extension Cables (DC5521 5.5 x 2.1 mm)
- Passive GPS Antenna
- 2x High Gain WiFi Antenna
- Quick Start Guide
Manual & Warranty
StellarMate OS
-
Core OS: Custom Linux distribution with Over-The-Air (OTA) updates.
-
Astronomy Suite: Fully pre-configured KStars and Ekos.
-
Driver Ecosystem: Integrated INDI Library supporting over 200+ astronomical devices.
-
Remote Access: Web Manager interface and EkosLive cloud connection. LAN access via VNC. Internet access via Rustdesk.
StellarMate Companion App
-
Platforms: Available on iOS (App Store) and Android (Google Play).
-
Key Features: Interactive HiPS Sky Atlas, plate solving, autofocus, guiding, target scheduler, live stacking, and remote power port control.
Hardware Setup
-
Antennas: Connect the WiFi and GPS antennas to their respective SMA ports.
-
Power Connection: Plug the XT-60 power adapter into the unit. Ensure the female DC plug is connected to a stable 10A @ 12V DC power supply or battery (For stable operation, use SM Pro Official 10A Power Supply).
-
Mounting: Attach the Universal Vixen/Losmandy Clamp (sold separately) via 4x M6 screws to clamp StellarMate Pro X directly to telescope dovetails.
- uipment (Mount, Main Camera, Guide Camera) via USB ports.
- Power on the unit. The Power and Activity LEDs will light up.
- Wait ~30 seconds for the unit to beep, indicating the unit is ready and the StellarMate HotSpot is broadcasted.
- Connect your phone/tablet to the Hotspot:
SSID: stellarmate | Password: stellar@mate
- Open the App, register via the QR code on the unit bottom, tap RESCAN, select your device, and create your equipment profile!
