Touptek ATR183C CMOS Color Cooled Camera (ATR183C)
Touptek ATR183C CMOS Color Cooled Camera (ATR183C) is backordered and will ship as soon as it is back in stock.
Pickup available at ASTRONOMY PLUS
Usually ready in 2 hours
FREE SHIPPING FOR ORDERS OVER $500* 🆓🚚
FREE SHIPPING FOR ORDERS OVER $500* 🆓🚚
*Some exceptions may apply. More info
We Have it in Stock? We're on it, shipping your order on the same day.
We Have it in Stock? We're on it, shipping your order on the same day.
*Ordered before 2PM ET & Business Hours only / This is an estimation and may vary
What if the product is not in stock?
What if the product is not in stock?
🛫 If the item is unavailable: It may be in transit to us or on order with the supplier. If not, we will promptly place the order. In case of delays, we will do our best to keep you informed. Don't hesitate to email us for delays.
🇨🇦 Canadian Authorized Dealer
🇨🇦 Canadian Authorized Dealer
Buy with confidence from a trusted Canadian astronomy retailer. We provide full pre-sale and after-sale support, expert advice, warranty assistance, and real technical help from passionate astronomers.
Touptek ATR183C CMOS Color Cooled Camera
ATR183C has a resolution of 5440x3648, 2.4μm square pixels, 1-inch optical format, and supports binning mode. The camera equips with two-stage TEC cooling system with excellent effect (cooling temperature deviation can be controlled within 0.1℃), dew prevention heater (window heating), built-in 12-bit ADC, 15ke full well, supports high frame rate mode (8.6 fps@12 bit /17 fps@8 bit RAW).

Please remember: all ToupTek Astro DSO cooled cameras can only be powered by 12V3A DC power supply. We recommend using the power adapter that comes with the camera or a lithium-ion battery with stable output of 11-14V. Please do not use power supplies that have falsely stated specifications or unstable outputs to power the camera, as this may affect image capture or even damage the camera.

Sensor Infor
ATR183C features Sony IMX183 1-inch Square Optical Format
Resolution: 5440*3648
Pixel Size: 2.4μm*2.4μm
Image Area: 13.06mmx8.76mm,
Diagonal: 15.72mm

DDR3
ATR183C camera has a 512MB (4Gb) ultra-fast memory buffer to ensure stable image transmission.

Two stage TEC cooling system
ATR183C is designed with an integrated heat dissipation structure and an efficient cooling module. The cooling system of ATR183C features a two-stage Thermoelectric Cooling (TEC) with controllable electric fan assisting in heat dissipation. This allows the image sensor to operate at temperatures up to 42 degrees Celsius lower than the ambient temperature. The exposure time can be set for up to 1 hour, ensuring that every minute detail is captured. Even in summer, it can still run stably all night with cooling temperatures ranging from of -5°C to -10°C.

Anti-dew technology
ATR183C adopts the new anti-dew technology , which can effectively solve the condensation problem through heating.
This heating function consumes about 5 watts, which can be turned off via software to save power.
Additionally, The dew heater at the protection window has 4 adjustable levels, allowing users to find the heating power that best suits their needs.

Camera parameters for performance analysis (Full res, RAW 12-bit, Temp: -10C)

Spectral Response

Mechanical Diagram



Connection with Accessories

Packaging List


Technical Specifications
| Category | Specification |
| Model | ATR183C (cooled color astronomy camera) |
| Sensor | Sony IMX183 (Back-illuminated, Color) |
| Resolution | 5440 × 3648 pixels |
| Pixel Size | 2.4 µm × 2.4 µm |
| Optical Format | 1" |
| Active Image Area | 13.06 mm × 8.76 mm (diagonal ~15.72 mm) |
| ADC | 12-bit |
| Full Well Capacity | ~15 ke⁻ |
| Read Noise | ~1.4 to ~2.6 e⁻ (depending on gain mode) |
| Dynamic Range | ~75 dB |
| Maximum SNR | ~41.6 dB |
| Binning | Supported |
| Frame Rate (12-bit) | 8.6 FPS (full resolution) |
| Frame Rate (8-bit RAW) | 17 FPS (full resolution) |
| Exposure Range | 0.1 ms to 3600 s (1 hour) |
| Buffer Memory | 512 MB DDR3 |
| Cooling System | Two-stage TEC cooling + controllable fan |
| Cooling Performance | Up to ~42°C below ambient |
| Anti-Dew Heater | Yes (4 levels) |
| Dew Heater Power | ~5 W |
| Power Requirement | 12 V DC, 3 A |
| Data Interface | USB 3.0 (backward compatible) |
| Thread / Mount | M42 × 0.75 |
| Back Focus | 17.5 mm |
| Dimensions | Similar to ATR3 series compact cooled body (approx. 80 mm diameter class) |
| Weight | Approx. 500–600 g class (manufacturer typical for this body type) |
| Spectral Sensitivity | Visible spectrum (standard IMX183 response) |
| Use Case | Deep-sky astrophotography with high resolution and small pixels |
| WHAT'S IN THE BOX | |
| Camera Body | ATR183C Camera |
| Power Adapter | 12 V DC, 3 A |
| Power Cable | Included |
| USB Cable | USB 3.0 Type-A to Type-B (high-speed) |
| Adapter Ring | 0 mm M48 → M42 adapter |
| Extender | 21 mm M42 extender (M42 male → M42 female) |
| Extender | 16.5 mm M48 → M42 extender (M48 female → M42 male) |
| Extender | 12.5 mm M42 male adapter |
| Protective Cap | Front dust cap for sensor window |
In the Box
-
ATR183C camera body
-
12 V, 3 A power adapter
-
Power cable
-
USB 3.0 cable
-
M42 / M48 adapter rings / spacers (various): likely M42-M42, M42-M48, etc.
-
Protective dust / cap for the sensor window
